Bearing

ניסיון
מקצועיות
ואיכות ללא פשרות

פיתרונות טכנולוגיים
מתקדמים
למגוון ישומים
וענפי תעשייה

איכות זה אנחנו
מוצרים, שירות ותמיכה

היצרנים המובילים
בעולם
,בתחומי ההנדסה
,מחקר ופיתוח
ותהליכי יצור
מתקדמים

ביצועים
מציבים
את הלקוח
צעד אחד
לפני כולם

רכיבי הנעה מדויקים




מיסבים לתעשיית המלט

כאשר מדובר בציוד מכאני הנדרש לעבוד ברציפות במשך כל השנה, השבתה בלתי מתוכננת איננה אפשרות אופרטיבית.

עבודה צמודה של מהנדסי NSK יחד עם יצרני המכונות ומשתמשי ציוד קצה בתעשיות הקריה, המלט, תערובות בטון מוכן ותעשיות האגרגטים, תרמה רבות להבנת צרכי הלקוח ולמתן מענה אמין ויצב, ובכך לצמצם זמני ההשבתה של המערכות המכאניות.

ניתן דגש ומענה מיוחד לבעיות וויברציה, לכלוך, גירוז ולדרישות עומס גבוה.

דגש על המשתנים הקריטיים – אמינות, איכות וייעול תחזוקה – שיפור ביצועים ותוצר סופי.

אמינות, עמידות ויעילות, התכונות החשובות והכרחיות בתעשיית המלט והבטון.

ל- NSK עומדים הניסיון הרב והטכנולוגיה המאפשרים עמידה בדרישות תובעניות אלה.

החל ממסבים סטנדרטיים וכלה במיסבים מיוחדים המביאים לידי ביטוי את החידושים הטכנולוגיים המתקדמים ביותר.

חברת NSK יכולה לספק את המענה הראוי לדרישות הרבות של ענפי הכרייה והבנייה. מוצרים חדשניים מסוג זה כוללים בין היתר:

מיסבי גלילים ומסבים כדוריים NSK-HPS ™: NSK-HPS עושים שימוש בתכונות העיצוב ופיתוח טכנולוגי של כלוב המיסב ובטיפולי שטח מיוחדים.

במסבים אלה נעשה שימוש בחומרים המתקדמים ביותר וכתוצאה מכך, קיבולת עומס הנשיאה מוגברת מאוד ותוחלת החיים מורחבת.

חברת NSK פיתחה פלדה מיוחדת Hi-TF: מסבי Hi-TF פותחו עם חומרים חדשניים וטכנולוגיית טיפול בחום לצורך עמידות מוגברת בתנאים קשים.
מסבים אלו משלבים חיי שירות ארוכים יחד עם עמידות מעולה בפני שחיקה ופגמים גם בתנאי עבודה תחת שימון מזוהם, על מנת להשיג ביצועי איכות ועלות יוצאי דופן.

אמינות מהווה מפתח להשגת יעדי ייצור.

שיפור משך חיי המכונות ושיפור ביצועי המכונה ללא תלות בתנאי סביבה קיצוניים כגון רטיבות, חום, אבק, רטט או עומס גבוה.

מגוון מסבים ורכיבי הנעה המספקים מענה איכותי והתמודדות מתמדת עם תנאי הסביבה הקיצוניים והתובעניים.

Spherical Roller Bearings – HPS™ Series
מיסב גלילים חביתוניים מתכווננים

  • High load capacity
  • High limiting speed
  • High strength cage (steel or brass)
  • Low noise and vibration

Spherical Roller Bearings – CAM Series
מיסב גלילים

  • Tough machined brass cage
  • Self-aligning ability with floating ring guide
  • Controlled roller skew
  • High dynamic and static load ratings
  • High speed performance – low operating temperature rise
  • High resistance to heavy & shock loading

Long-life VS Spherical Roller Bearings
מיסב גלילים חביתוניים

  • Improved surface roughness on rollers, inner & outer ring
  • Specifically designed for Vibrating Screens
  • Load rating increased by 1.25 times
  • Dampened vibration
  • Better roller guidance & smooth running
  • Reduced bearing damage from slippage, surface fatigue, flaking

Spherical Roller Bearings – EVB Series
מיסב גלילים חביתוניים סדרת EVB

  • Extra capacity vibratory bearings
  • Heat stabilized up to 200°C
  • One-piece machined brass cage
  • Special ring tolerances to withstand vibration, shock loads & misalignment

Cylindrical Roller Bearings – EM Series
מיסב גלילים סדרת EM

  • Extra capacity internal design
  • High strength brass cage – reduces wear and improves performance in vibrating equipment
  • Special cage pocket profiling improves oil / grease flow
  • 30% higher load rating than conventional bearings

Cylindrical Roller Bearings – EW Series
מיסב גלילים סדרת EW

  • High radial load capacity
  • High speed applications.
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Sealed Deep Groove Ball Bearings
מיסב כדורי בעל אטימה מיוחדת

  • VitonR* seals (black); Standard seals (brown)
  • High temperature VitonR* seals can run up to 200°C
  • Standard seals can run up to 120°C
  • Low noise level
  • DuPont Performance Elastomers LLC

Single Row Deep Groove Ball Bearings – HR Series
מיסבים כדוריים מסידרת HR

  • Special internal design
  • Bigger rolling elements
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Self-Lube® Units
בתי מיסב בעלי גירוז עצמי, נטול צורך תחזוקה

  • Range of diverse casting and pressed steel and thermoplastic housings
  • 3 main seal options – standard, triple lip, or flinger/standard
  • All cast housings supplied with re-greasing facility
  • Secure locking shaft for all speed, load and vibration conditions
  • Protector caps available

HLT inserts
מיסבי בתי מיסב

  • Special internal geometry (cage & internal features) designed to operate at extreme temperatures
  • High performance Kluber grease operating at extreme temperatures (-40°C and +180°C)
  • Durable silicone rubber seals offer
  • protection at extreme temperatures

Mounted Units
בתי מיסב

  • Sealed single-row ball bearing in a Pillow block or flanged housing
  • NSK units feature “flingers” that keep contaminants away
  • Housings available in ductile cast iron, cast steel or stainless steel
  • Variety of shaft locking mechanisms

Triple Lip Seal
אטימה משולשת

  • Nitrile rubber triple lip seals
  • Longer life due to superior seal performance
  • Extended lubrication intervals – increases productivity ofmachines and reduces maintenance costs

Plummer Blocks
בתי מיסב

  • Split housing allows easy mounting and dis-mounting
  • › Various sealing options available – V-ring seals, labyrinth or heavy duty taconite
  • Multi lubrication points

Integrated Bearing Assemblies
מרכבי מיסב

  • Bespoke Housings – High strength SG iron housing
  • Vibratory specification bearings: 50-60% vibration and noise reduction
  • Labyrinth & contact seals
  • Pre-greased & ready to fit – can be re-greased
  • Installation ease & benefits reduce in-house costs

Tapered Roller Bearings
מיסב גלילי קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Double Row Taper Roller Bearings
מיסב גלילי קוני בעל שורה כפולה

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Also available with heavy-duty seals

Molded-Oil™ Bearings
מיסבי יציקה

  • Grease-free property with no oil refilling
  • Operating life more than twice as long as grease lubrication (in water/dust contaminated environments)
  • Extended maintenance-free performance

TF Series
סדרת TF

  • Innovative materialsplastic housings
  • Special heat treatment technology
  • Up to 10 times service life in contaminated lubrication
  • Up to 4 times service life at 160°C
  • 40% improvement on seizure resistance

Angular Contact Ball Bearings – HPS™ Series
מיסב כדורי זוויתי

  • Optimised internal design
  • High strength ball guided cage – available in brass, polyamide or L-PPS
  • High running accuracy P5 (ISO Class 5)
  • High load ratings
  • Universal facing as standard
  • 40 degree Contact Angle

Double Row Angular Contact Ball Bearings
מיסב כדורי זוויתי בעל שתי שורות

  • High quality – Ultra clean steel
  • Steel or polyamide cage
  • Super finished raceways, minimizes noise and improves lubricant distribution
  • Open or Shielded (ZZ or 2Z)
  • Sealed DDU or 2RS

ong-life Pinion shaft with cage & roller assembly
מרכב מיסב מחטים וגליל

  • Compact & Lightweight
  • Special heat treatment to shaft & rollers
  • Mirror smooth finish on shaft & rollers ensures adequate oil film thickness
  • Reduces fatigue flaking and increased contamination resistance
  • Improves time between maintenance intervals

Needle Roller Bearings
מיסב מחטים

  • Resin (Nylon 46) M type cage & roller assemblies
  • High durability even under heavy loads & misaligning operating conditions
  • Higher load capacity than conventional machined cages
  • Maintains inner cage strength at higher oil temperatures

להלן מידע לגבי יחידות גירוז ושימון אוטומטי לתעשיית ייצור נייר ורכיביו:
מגרזת אוטומטית – משמנת אוטומטית, תוצרת סימטק שוויץ , Simalube – the automatic single-point lubricator :

לחצו על הקישורים לקבלת מידע נוסף:

https://www.bearing.co.il/lubricator.aspx

https://www.bearing.co.il/simatec.aspx

להלן מבחר קטלוגים להורדה:

מיסבים לתעשיית הרכב

מאז שסיפקה לראשונה מיסבים כדוריים לשוק היפני ב 1916, חברת NSK הרחיבה את מגוון מוצריה ותרמה רבות לכלל ענפי התעשייה השונים, בפרט לתעשיית הרכב.

מוצרי החברה בתחומי הרכב ידועים באיכותם הגבוהה. החברה מספקת מגוון רכיבי הנעה עבור תמסורות, מערכות היגוי, מפרקים, ומערכות הגה כח מתקדמות.

NSK פועלת באופן נמרץ ותמידי לפיתוח טכנולוגיות תנועה ובקרה, המבוססות על פיתוחי החברה. מגוון מוצרי NSK המשולבים ברכבים הינם בעלי תכונות המקטינות חיכוך והפסד אנרגיה, זאת בהתאם לדרישה העולמית לצמצום צריכת משאבי אנרגיה.

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.

All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מיסבים ורכיבי הנעה לתעשיית המזון והמשקאות

תעשיית המזון והמשקאות מציבה אתגר טכנולוגי משמעותי עבור המיסבים ורכיבי ההנעה המצריכים התמודדות עם תחזוקה שוטפת ומזעור תקלות.

נושאי בטיחות, תברואה ואמינות מכאנית, עומדים בראש סדר העדיפויות החל משלב העיבוד המקדים ועד שלב המילוי והאריזה.

  • אמינות ופשטות תחזוקה
  • טכנולוגיות חומרים מיוחדת
  • טכנולוגיות סיכה מיוחדות – food grade grease

מיסבים לסביבה עבודה רטובה
Aqua-Bearings

NSK Aqua-Bearings use a special fluororesin for the inner and outer rings, as well as for the cages.
These bearings are perfect for a whole string of applications with water, alkali and acid environments.
They manage without the usual grease or oillubrication.

High-Speed, Low-Noise Ball Screws BSS Series
ברגי ואומי הנעה ליניארית

These compact, high-speed screws feature noise reduction of up to 6 dB compared to noise levels in traditional products.

Monocarrier™
יחידת הנעה מסילה ליניארית ובורג כדורי

This is a compact, lightweight, single-axis actuator that combines a ball screw and linear guide.

NSK Linear GuidesSeries
מסילות ליניאריות

A rich lineup of products for all types of usage conditions.

Megatorque Motor™
מנוע

Because the drive section is not equipped with a reducer mechanism, the unit is compact, lightweight, highly precise, with a high torque, and no rattling.

Food Grade Grease-Packed Stainless Steel Bearings
גריז ייעודי לתעשיית המזון והמשקאות

The food grade grease-packed stainless steel bearings registered in the NSF H1 category and NSF H3 category are now available as a series.
The heat-resistant (max 200°C) NSF H1 category-registered food grade grease is also available..

Molded-Oil Bearings:
מיסבים בעלי גירוז מוצק לתנאי רטיבות ועבודה קיצונית

Environmentally friendly Molded-Oil™ Bearings offer high performance in water- and dust-contaminated environments.
Enhanced Molded-Oil™ strength makes these ever-evolving bearings ideal for high-speed operation.

להלן מבחר קטלוגים להורדה:

מיסבים למנועים חשמליים

מנועים חשמליים משמשים כמקור הנעה במגוון עצום של יישומיים ותחומי תעשייה.

מיסבים מתוצרת NSK נמצאים בשימוש נרחב במגוון סוגי מנועים ומאפשרים תנועה מדויקת, שקטה ואמינה, תוך נשיאת עומס המנוע.

בעידן בו איכות הסביבה עולה על סדר היום העולמי, השימוש בחשמל כמקור כוח הנעה הופך להיות יותר נפוץ ובהתאם לכך גם גוברת הדרישה למנועים חשמליים בעלי צריכת אנרגיה נמוכה יותר, בעלי אורך חיים ממושך יותר ובעלי אמינות גבוהה יותר.

חברת NSK מספקת מיסבים מהאיכות הגבוהה ביותר, תוך הסתמכות על הידע והניסיון הרב שצברה במשך למעלה מ 100 שנות ייצור מיסבים ותוך שימת דגש מיוחד על טכנולוגיות הליבה של –NSK: tribology (מדע החיכוך).

טכנולוגיות אלו המכוונות לעבר צריכת אנרגיה נמוכה יותר והשגת אורך חיים גדול יותר, מבטאות מחויבות למתן מענה איכותי לצורכי התעשייה והלקוחות ולשמירה מתמדת על איכות הסביבה.

מיסבים מיניאטוריים
Extra Small Ball Bearings and Miniature Ball Bearings

NSK offers a full range of metric and inch size miniature ball bearings with bore diameters of less than 10mm.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרתEW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.
They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מיסבים לתיבות הילוכים / גיר תעשייתי

תמסורות המשמשות להפחתה או הגברת מהירות הינן רכיב נפוץ ביותר בתעשייה.
בין היתר הן מאפשרות הגברת מומנט סיבובי ושינוי מהירות סיבוב.
במקרים רבים פעולות של תחזוקה ותיקון רכיבי תמסורות מהווה מלאכה מורכבת למדי.
לאור הדרישות המכאניות המיוחדות, תוכננו מיסבים לתיבות גיר Bearings For Gear Box תוך עמידה באלמנטיםהנדרשים:

  • עוצמת רעש נמוכה
  • רטט נמוך
  • ייצור חום מינימלי
  • משקל נמוך
  • קשיחות גבוהה
  • עמידה בעומס גבוה
  • חיי תפעול ארוכים
  • אמינות
    צריכה נמוכה של אנרגיה
  • עלויות תחזוקה נמוכות

Thrust Roller Bearings
מיסבי לחץ (כדורי / גלילי)

Available with cylindrical or spherical rollers, NSK’s thrust roller bearings sustain only axial loads, but are suitable for heavy loads and offer high axial rigidity.

Spherical roller thrust bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection.
Machined brass cages come standard, though the E-type uses a pressed steel cage for higher load capacity.

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרת EW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.

All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.

They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מיסבים ורכיבי הנעה מדויקים לתעשיות מתקדמות בתחום האופטיקה והמוליכים למחצה

מתן מענה לאתגרים טכנולוגיים:

המיסבים, הרכיבים הליניאריים ורכיבי מכנטרוניקה נדרשים לפעול תוך מזעור פליטת האבק והגז, עמידות תרמית גבוהה, עמידות בפני קורוזיה, קשיחות גבוהה, מהירות גבוהה יותר, דיוק גבוה יותר וצמצום רעש אקוסטי.

מוצרי סדרת NSK SPACEA ™ מכילים מיסבים, מסילות הנעה ובורגי הנעה כדוריים ליניאריים המותאמים בין היתר לעבודה בתנאי וואקום, חדר נקי, טמפרטורה גבוהה וסביבה קורוזיבית.

שילוב יכולות הליבה של חברת NSK בתחום הטריבולוגיה, הנדסת חומרים וטכנולוגיות ניתוח ובדיקה, מאפשרים שיפור ביצועים של יישומים בתחומי האלקטרו אופטיקה והמוליכים למחצה, וכל זאת תוך שמירה על סביבה ירוקה.

מיסבים לחדר נקי
Clean Lubricant V-DFO Bearings

V-DFO bearings feature a new innovation: a fluorine oil coating is applied to inner/outer rings, balls and cage to deliver cleanliness and long life.

מנוע מגה-טורק
Megatorque Motor™

With their high accuracy, high torque, light weight, and compact size,
NSK direct drive motors improve productivity and contribute to higher accuracy, lighter weight, and greater compactness of various devices, such as high-speed robot arms.

מסילות ליניאריות, בורגי הנעה ליניאריים
NSK Linear Guides with E-DFO Thin-Film Lubrication for Vacuum Environments

Further evolved DFO thin-film lubrication technology ensures significantly longer operating life and lower outgassing in vacuum environments.

Features:

  1. Suitable for high vacuum
  2. Low outgassing
  3. Low friction

מיסבים לסביבת וואקום
Bearings for vacuum environments

basic products of the NSK SPACEA Series for special environments, which also includes bearings suitable for operating environments such as corrosive, clean, and high-temperature environments, and non-magnetic requirement.

NSK BALL SCREWS
בורגי הנעה ליניארית

NSK’s Ball Screw is produced from the latest tribology (friction control technology), and boasts the world’s top level production volumedue to excellent production technology and quality control.

It is also used in machine tools, general machines such as injection molding machines and conveyors, and in special environments such as semiconductor and FPD manufacturing equipment.
We are contributing globally to development.

NSK LINIER GUIDES
מסילות ורוכבים להנעה ליניארית

NSK Linear Guide manufactured by production technology pursuing high precision and high quality is Machine tools,
semiconductor manufacturing equipment, with a wide lineup including ball guides and roller guidesWe respond speedily to various requests such as general industrial equipment and medical use

Cylindrical Roller Bearings – EW Series
מיסב גלילים חביתוניים סדרתEW

  • High radial load capacity
  • High speed applications
  • High strength pressed steel, machined brass or polyamide cage
  • Low noise & heat generation

Ball Screw Support Bearings
מיסב לחץ זוויתי לבורג כדורי

High-precision angular contact thrust ball bearings for precision ball screws are designed for a wide variety of applications with a range of high rigidity and high load capacity series available.

Single Row Deep Groove Ball Bearings – HR Series
מיסב כדורי מסדרת HR

  • Special internal design
  • Bigger rolling elements.
  • Increased dynamic load rating
  • Increased life in operation
  • Interchangeable with the standard range
  • Extra clean Z steel as standard

Angular Contact Ball Bearings
מיסב כדורי זוויתי (חצי-לחץ) בעל שורה אחת

NSK’s comprehensive range of angular contact ball bearings has been designed to meet the ever-evolving requirements of equipment manufacturers.
Angular contact ball bearings feature a contact angle that sustains significant axial loads in one direction at the same time as radial loads.
Since an axial component is generated when radial load is applied, these bearings are typically used in pairs or multi-bearing sets.

Thrust Ball Bearings
מיסבי לחץ (כדורי / גלילי)

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads.
These bearings feature bearing washers with raceway grooves in which the balls move.

Needle Roller Bearings
מיסבי מחטים

Needle roller bearings (sometimes called “needle bearings”) use long and narrow cylindrical rollers that sometimes exceed JIS/ISO size ranges.
They are categorized as thrust or radial bearings based on which load direction they support.
Radial types include drawn-cup and solid types, as well as application-specific track rollers (cam and roller followers).
Thrust needle and thrust roller bearings respond to axial load needs.

Spherical Roller Bearings
מיסב גלילים מתכוונן (ספריקלי)

Spherical roller bearings are available in EA, C, CD, and CA types designed for high load capacity. Types EA, C, and CD have pressed steel cages, while CA uses machined brass cages.
All EA types are high-performance standard NSKHPS Series bearings.
NSKHPS Series bearings have especially high load capacity, high limiting speeds, and excellent performance at temperatures up to 200°C.

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment
  • Custom-made sets with spacers

Cylindrical Roller Bearings
מיסב גלילים

Cylindrical roller bearings (CRBs) have a simple structure with their cylindrical rollers in linear contact with the raceways.
They offer high load capacity under primarily radial loads.
Low friction between the rollers and ring ribs makes these bearings suited for high speed rotation

להלן מבחר קטלוגים להורדה:

מסבים ורכיבי הנעה למכונות עיבוד שבבי, CNC, מיסבים לספינדל

 

הטכנולוגיה המתקדמת והניסיון מציבים את חברת NSK כמובילה העולמית בתחום המסבים ורכיבי ההנעה לתעשיית מכונות כלים, עיבוד שבבי מדויק.

  • מסבים ברמת דיוק שיא ולמהירויות אולטרה גבוהות.
  • spindles (צירים מוכנים) , אולטרה מהירים ורמות דיוק הגבוהות בעולם.
  • בורגי הנעה כדוריים שהשיגו מעמד כמותג עולמי בזכות ניסיון וטכנולוגיות חדשניות ביותר.
  • מסילות ליניאריות – טכנולוגיות ייצור המבטיחות ביצועים גבוהים ואיכות מוצר חסרת פשרות.

חברת NSK מיישמת טכנולוגיות אנליטיות המבוססות על מדע הטריבולוגיה, טכנולוגיות בקרת חיכוך וסיכה, בהן נעשה שימוש לצורך מזעור הפסדי אנרגיה, ושיפור ביצועי המסבים, המסילות הליניאריות ובורגי ההנעה המדויקים.

ברשותנו מלאי זמין של מבחר מיסבים מדויקים לתעשיית מכונות לעיבוד שבבי, CNC, ספינדלים.

Single Row Deep Groove Ball Bearings – HR Series
מסיב כסודרת סדרת HR

  • Special internal design
  • Bigger rolling elements
  • Increased dynamic load rating
  • Increased life in operatio

Tapered Roller Bearings
מיסב גלילים קוני

  • Inch & metric sizes
  • Standard steel / carburised steel / HTF treatment

Super Precision Angular Contact Ball Bearings
מיסבים זוותיים מדויקים

NSK offers a wide lineup of super precision angular contact ball bearings to provide optimal specifications for your application.
Our bearings provide the perfect solution for equipment requiring high running accuracy or high rotational speed, such as the main spindles of machine tools.

מסבי גלילים מדויקים, חד שורתיים ודו שורתיים
Super Precision Cylindrical Roller Bearings
Double Row Cylindrical Roller Bearings

NSK super precision cylindrical roller bearings are designed specifically to handle large radial loads in high-speed spindle applications that require high running accuracy.

מיסב כדורי זוויתי (חצי לחץ) מיוחד, למהירויות גבוהות
High Precision Angular Contact Ball Bearings

Suitable for high-speed and high precision motors.

  • Cage material: ball guided polyamide cage (T1X,TYA), inner ring guided phenolic cage (T),
  • selection depends on the application
    Suitable for silent or low vibration operation

מיסב כדורי חצי לחץ, מדויק, מהירות אולטרה גבוהה.
Ultra High Precision Angular Contact Ball Bearings. BSR Series

High performance bearings developed specifically for internal grinding or high-speed motor applications under spring preload.

  • Bore size range: 6 – 25 mm, contact angle: 15?
    Ball material: steel (S type), ceramic (H and X type)
  • Non separable type
  • Universal combinations (DU and SU)

מיסב לחץ כדורי זוויתי, מדויק, מהירות גבוהה
High-Speed Angular Contact Thrust Ball Bearings.
ROBUST Series: BAR & BTR

High rigidity thrust bearings for lathe applications.

  • Contact angles: 30? (BAR), 40? (BTR)
  • Ball material: steel (S type), ceramic (H type)

מיסב כדורי זוויתי, מדויק, למהירות אולטרה גבוהה
Ultra High-Speed Angular Contact Ball Bearings ROBUST Series: BNR & BER

High performance bearings developed for high-speed operation with low temperature rise.
Suitable for ultra high precision machining applications, and ultra high-speed applications.

  • Contact angles: 18? (BNR), 25? (BER)
  • Ball material: steel (S type), ceramic (H and X type)
  • Cage design: phenolic (T), polyamide (TYN), depending on application requirements
  • ROBUST series also can be used for ultra high speed applications of over 3 million dmn.

מיסב גלילים חד שורתי, מדויק, למהירויות אולטרה גבוהות.
Ultra High-Speed Single Row Cylindrical Roller Bearings

High performance cylindrical bearings designed for ultra high-speed applications, such as machining center spindles.

  • Cage material: brass (MR)(1), PEEK resin (TP)
    Roller material: steel, SHX, ceramic
  • Ultra high-speed ROBUST RXH design can be used up to 3 million dmn.
  • (1) MR cage is used in the standard series

מיסב כדורי זוויתי מדויק, גירוז ישיר למהירות גבוהה
High Precision Angular Contact Ball Bearings – RobustShot Series

Direct oil-air lubrication in order to achieve highest speeds.

  • Direct air-oil Lubrication via a through-hole in the outer ring
  • Contact angles: 18? (BNR), 25? (BER)
  • Lubrication groove with O-rings in the outer ring
  • Hybrid bearings – steel rings, ceramic balls

מיסב תמיכה לבורגי הנעה כדוריים
NSK, HPS Angular Contact Thrust Ball Bearings for Ball Screw Support

Special Series for Machine Tool Applications, TAC

  • High rigidity thrust bearings designed specifically for ball screw support applications in machine tools.
  • Contact angle: 60?
  • Can be universally matched to any required rigidity specification or life cycle
  • A pre-greased line using special grease is also available
  • Can be supplied with contact seals and waterproof grease

מיסב תמיכה לבורגי הנעה כדוריים, Heavy Duty
Bearings for Swiveling Spindle Heads in Machine Tools

NSK provides angular contact ball bearings specially designed for machine tool swivel heads.

These bearings match the high-precision processing needed in multi-spindle configurations.

In particular, our ROBUSTSLIM high-accuracy low-profile angular contact ball bearings offer high rigidity with low torque.

מיסב תמיכה מיוחד, דוו-שורתי, לברגי הנעה כדוריים
NSK, HPS BSBD Ball Screw Support Bearings
BSN & BSF Series

The double row configuration, enables the bearings to support large axial forces in both directions.

  • BSN series withouth flange, BSF series with flange
  • Paired types also available
  • Contact lip seal – provides good sealing at high speeds

להלן מבחר קטלוגים להורדה:

מיסבים ורכיבי הנעה לתעשייה הרפואית

הדרישה לפיתוח מערכות הדמיה רפואית מתקדמות, כגון מכונות רנטגן ו-CT ,סורקים, יחד עם ציוד אבחון אולטרסאונד מציבים אתגר טכנולוגי משמעותי.
הפיתוח המואץ של ציוד דיאגנוסטי רפואי מתקדם מגדיר צורך בביצועים גבוהים יותר ובאיכות מוצר חסרת פשרות.
המיסבים ורכיבי ההנעה הליניארית אותם אנו מספקים, נועדו לתת מענה לדרישות אלו. מהירות גבוהה יותר, דיוק גבוה יותר, קשיחות גבוהה, רטט נמוך, רעש נמוך, נוחות תחזוקה. טכנולוגיות הליבה של NSK, כגון הנדסת חומרים, טכנולוגיות סיכה וטכנולוגיות דיוק, תורמות באופן משמעותי לשיפור ביצועי מתקנים רפואיים מכאניים.

  • רכיבים מפלדת מיסבים, פלדת אל-חלד (נירוסטה), חומרים קרמיים ופולימרים איכותיים ביותר.
  • רכיבים עם ציפוי מיוחד ועמידות גבוהה בפני קורוזיה. כגון ציפוי Duralloy coating, special black chrome coating
  • חסכון במשקל, עמידה בעומסים ודיוק גבוה.
  • פעולת הנעה שקטה, רציפה ועקבית.
  • תחזוקה שוטפת מינימלית.

מיסבים מיניאטוריים, פלדת אל-חלד (נירוסטה)
Extra Small Ball Bearings and Miniature Ball Bearings

NSK offers a full range of metric and inch size miniature ball bearings with bore diameters of less than 10mm.

מסילות ליניאריות עם ציפוי
Linear Guides

Interchangeable rail and linear slide sold separately or as assembled components.

בורגי הנעה כדוריים, לרבות ציפוי מיוחד
Linear Ball Screw

  • High accuracy and rigidity ensure optimal performance.
  • Compact design for space saving applications.
  • Available in various diameter, length, lead, accuracy, preload and recirculation options.

יחידות מודול רובוטי
Robot Modules™ Products

  • Integrated linear axis system that uses NSK.
  • linear guides, ball screws, and Monocarrier™ actuators.
  • Ergonomic design, sealed in an aluminum housing.
  • High rigidity, accuracy and repeatability.
  • Pre-assembled axis reduces time and labor cost.
  • Motor-ready design for customer flexibility.

מכלולי הנעה ליניאריים
Monocarrier™ Linear Actuator Products

  • Easy-to-install ball screw, linear guide and support units integrated into one structure.
  • Lightweight, compact design.
  • Long operating life and maintenance-free operation.
  • Rust-resistant, chrome plated standard material.

יחידות תמיכה בבורגי הנעה
Support Units for Ball Screws

  • Reduces maintenance cost, no re-lubrication is required.
  • Offers high dust protection.
  • Extends ball screw product life.
  • Provides maximum performance for applications from light to heavy loads.
  • Standard stock options available.

משמנת K1 לשימון עצמי ללא תחזוקה תקופתית
K1™ Lubrication Units

  • Long-term, maintenance-free lubrication unit that is available for ball screws, linear guides, Robot Modules™ and Monocarrier™ product.
  • No maintenance required for 5 years or up to 10,000 km operational distance.
  • All precision linear products can be equipped with K1TM lubrication units.

מוצרים מורכבים
Integrated Products

Custom designs integrating NSK precision linear components

מיסבים לסביבה מיוחדת
Bearings for Special Environments (SPACEA™ Series)

These bearings are ideal for high-precision applications and other environments where standard bearings cannot be used.

להלן מבחר קטלוגים להורדה:



מיסבים ואביזרי הנעה

bearing

חברת שניצקי ארצי בע"מ מתמחה בייבוא ושיווק של מיסבים, כדורי מסוע, מוצרי הנעה ליניארית ואביזרי הנעה נלווים.

החברה הינה מהוותיקות בתחומה בארץ, נוסדה בשנת 1978 ומאז משרתת נאמנה את לקוחותיה מכל תחומי התעשייה בארץ, במגזר הפרטי והציבורי.

אנו היבואנים והמפיצים של חברת NSK , חברת RHP, חברת Alwayse , חברת SYI וחברות נוספות.

ברשותנו מגוון רחב של מוצרים לרבות מיסבים מדויקים, מיסבים לסביבה מיוחדת, מיסבים מיניאטוריים, מיסבי מחטים, מיסבי גלילים, מיסבי לחץ, מיסבים ליניאריים, בתי מיסב, אטמים, כדוריות ומוצרי שינוע נלווים.

לחץ לקבלת מידע נוסף אודות NSK יצרן המיסבים המוביל בעולם.

תפריט מוצרים ראשי

תפריט נתונים טכניים

הנעה ליניארית מדויקת

לינארי

רכיבי הנעה ליניארית ומערכות הנעה ליניארית המספקים מענה לאתגרים הטכנולוגיים התובעניים ביותר.

מבין מוצרי ההנעה הליניארית ניתן להשיג : מסילות ליניאריות, ברגים כדוריים וברגים מוליכים, אקטואטורים ליניאריים, מוצרים בעלי גירוז עצמי, מערכות X-Y-Z ועוד.

הנעה ליניארית מתקדמת באיכות מעולה. מבחר דגמים הבאים לשרת מגוון צרכים בתעשיות השונות.


לחץ לקבלת מידע נוסף לינארי

כדורי מסוע - Alwayse Engineering

מיסב

חברת שניצקי ארצי בע''מ המשווקת והמפיצה הבלעדית של חברתEngineering Alwayse בישראל, יצרנית כדורי מסוע ומסועים הגדולה בעולם.

עם וותק של מעל 70 שנה, חברת Alwayse צברה מוניטין של מומחית עולמית בייצור כדורי מסוע, מסועים ואביזרים לשינוע חומרים וסחורות.

לרשות Alwayse עומד טווח הייצור המקיף והגדול ביותר של כדורי מסוע וחלקי מסוע מקרב כל היצרנים בעולם.
מעל ל 150 דגמים של כדורי מסוע ומעל 5000 ספציפיקציות שונות.

לחץ לקבלת מידע נוסף אודות היצרן

לחץ לקבלת מידע טכני

לחץ להצגת דגמי כדורי מסוע

קישור לאתר Alwayse Engineering בישראל

הצעת מחיר

מדריך לאבחון תקלות במיסבים
Doctor Bearing

מיסבים
זיהוי גורמי זנק אפשריים ומתן אמצעי נגד לטיפול בגורמי הכשל.
כניסה למדריך
הצגת סוגי תקלות .